HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

228 FibreAlliance MIB objects
connUnitPortUnitId
OID 1.3.6.1.3.94.1.10.1.1
Description The connUnitId value of the connectivity unit that contains this port.
Note Same value as connUnitId.
connUnitPortIndex
OID 1.3.6.1.3.94.1.10.1.2
Description Number of physical ports between 0 and maximum number of system supported ports in
the connectivity unit (internal/embedded, external).
Note To determine the maximum number of system supported ports, use the SNMP GET
command on swFcPortCapacity.
The HP StorageWorks switches support 0 to maximum number of system supported ports.
The maximum number of supported ports are as follows:
• 8 for the SAN Switch 2/8-EL and SAN Switch 2/8V
• 12 for the Brocade 4Gb SAN Switch for HP p-Class BladeSystem
• 16 for the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/16, and SAN Switch
2/16V
• 32 for the SAN Switch 2/32 and SAN Switch 4/32
• 64 for the Core Switch 2/64
• 128 for the SAN Director 2/128
• 256 for the 4/256 SAN Director
connUnitPortType
OID 1.3.6.1.3.94.1.10.1.3
Description The port types are:
• unknown (1)
• other (2)
• not-present (3)
• hub-port (4)
• n-port (5): End port for fabric
• l-port (6): End port for loop
• fl-port (7): Public loop
• f-port (8): Fabric port
• e-port (9): Fabric expansion port
• g-port (10): Generic fabric port
• domain-ctl (11): Domain controller
• hub-controller (12)
• scsi (13): Parallel SCSI port
• escon (14)
• lan (15)
• wan (16)
• ac (17): AC power line. (Not supported in Fabric OS 2.6.1.)
• dc (18): DC power line. (Not supported in Fabric OS 2.6.1)
• ssa (19): Serial storage architecture. (Not supported in Fabric OS 2.6.1.)