HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 221
connUnitDomainId
OID 1.3.6.1.3.94.1.6.1.11
Description 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if
required. If this value is not applicable, return all bits to 1.
Note Set to the switch domain ID (as per FC-SW).
connUnitProxyMaster
OID 1.3.6.1.3.94.1.6.1.12
Description A value of yes means this is the proxy master unit for a set of managed units. Possible
values are:
• unknown (1)
• no (2)
• yes (3)
For Example, this could be the only unit with a management card in it for a set of units. A
standalone unit should return yes for this object.
Note Set to 3 (yes).
connUnitPrincipal
OID 1.3.6.1.3.94.1.6.1.13
Description Indicates whether this connectivity unit is the principal unit within the group of FEs. If this
value is not applicable, it returns unknown. Possible values are:
• unknown (1)
• no (2)
• yes (3)
Note If the switch is principal, this is set to 3 (yes); otherwise, it is set to 2 (no).
connUnitNumSensors
OID 1.3.6.1.3.94.1.6.1.14
Description Number of sensors (between 0 and maximum number of sensors) in the
connUnitSensorTable.
Note See Table 13 on page 152 for specific sensor counts on the various switches.
connUnitStatusChangeTime
OID 1.3.6.1.3.94.1.6.1.15
Description The sysuptime time stamp (in centiseconds) at which the last status change occurred for
any members of the set; this is the latest time stamp that connUnitStatus or
connUnitPortStatus changed.
Note Not supported.