HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

182 SW MIB objects
swBlmPerfFltMntEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1
Description Filter-based monitoring counter for given port.
Index swBlmPerfFltPort, swBlmPerfFltRefkey
swBlmPerfFltPort
OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1
Description Identifies the port number of the switch.
swBlmPerfFltRefkey
OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2
Description Identifies the reference number of the filter. This reference number is assigned when a filter
is created. In the SNMP Index, start with one instead of 0, add one to actual reference
key.
swBlmPerfFltCnt
OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3
Description Receives statistics of filter-based monitor. Filter-based monitoring provides information
about a filter hit count, such as:
• Read command
• SCSI or IP traffic
• SCSI Read/Write
swBlmPerfFltAlias
OID 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4
Description Alias name for the filter.
Trunking group
swSwitchTrunkable
OID 1.3.6.1.4.1.1588.2.1.1.1.24.1
Description Whether the switch supports the trunking feature: no (0) or yes (8).
swTrunkTable
OID 1.3.6.1.4.1.1588.2.1.1.1.24.2
Description Displays trunking information for the switch.
Note For the SAN Switch 4/32, 8 ports per trunk are supported. The SAN Switch 4/32
supports masterless trunking, or dynamic swapping of master port. See the HP
StorageWorks Fabric OS 5.x administrator guide for more information on these features.