HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

180 SW MIB objects
ASIC performance monitoring group
This section discusses the swBlmPerfALPAMnt MIBs.
swBlmPerfALPAMntTable
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1
Description AL_PA monitoring counter table.
Note For the SAN Switch 4/32, 12 filter monitors per port are supported.
swBlmPerfALPAMntEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1
Description AL_PA monitoring counter for given AL_PA.
Index swEndDevicePort, swEndDeviceAlpa
swBlmPerfAlpaPort
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1
Description This object identifies the port index of the switch.
swBlmPerfAlpaIndx
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2
Description This object identifies the AL_PA index. There can be 126 AL_PA values.
swBlmPerfAlpa
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3
Description This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to
239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have
–1 value.
swBlmPerfAlpaCRCCnt
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4
Description Get CRC count for given AL_PA and port. This monitoring provides information on the
number of CRC errors that occurred on the frames destined to each possible AL_PA
attached to a specific port.
Note For the SAN Switch 4/32, this value is always 0.
CRC counters are not supported on this platform.
swBlmPerfEEMntTable
OID 1.3.6.1.4.1.1588.2.1.1.1.23.2
Description End-to-end monitoring counter table.