HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

158 SW MIB objects
SW agent configuration group
swAgtCmtyTable
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11
Description A table that contains the access control and parameters of the community, one entry for
each community.
Note The table displays all of the community strings (read and write) if it is accessed by the
write community string. Only read community strings are displayed if it is accessed by the
read community string.
In Secure Fabric OS, the community strings can be modified only on the primary switch.
swAgtCmtyEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1
Description An entry containing the community parameters.
Index swAgtCmtyIdx
swAgtCmtyIdx
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1
Description The SNMPv1 community entry.
Note The return value for this entry is 1 through 6.
swAgtCmtyStr
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2
Description This is a community string supported by the agent. If a new value is set successfully, it
takes effect immediately.
Note Default values for communities are as follows:
• 1 (Secret Code)
• 2 (OrigEquipMfr)
• 3 (private)
• 4 (public)
• 5 (common)
• 6 (FibreChannel)
Community strings 1-3 are read-write and strings 4-6 are read-only.
You can change the community setting using the agtCfgSet command.
swAgtTrapRcp
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3
Description The trap recipient associated with the community. If a new value is set successfully, it takes
effect immediately.
Note If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP
trap is not sent for the associated community string.
With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the
associated community string.