HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 151
swFlashDLFile
OID 1.3.6.1.4.1.1588.2.1.1.1.1.15
Description The name of the file to be downloaded or uploaded.
swFlashDLPassword
OID 1.3.6.1.4.1.1588.2.1.1.1.1.16
Description The password to be used for FTP transfer of files in the download or upload operation.
swBeaconOperStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.1.18
Description The current operational status of the switch beacon. Possible values are:
• On (1): The LEDs on the front panel of the switch run alternately from left to right and
right to left. The color is yellow.
• Off (2): Each LED is in its regular status, indicating color and state.
swBeaconAdmStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.1.19
Description The desired status of the switch beacon. Possible values are:
• On (1): The LEDs on the front panel of the switch run alternately from left to right and
right to left. Set the color to yellow.
• Off (2): Set each LED to its regular status, as indicated by its color and state.
swDiagResult
OID 1.3.6.1.4.1.1588.2.1.1.1.1.20
Description The result of the POST diagnostics. Possible values are:
• sw-ok (1): The switch is okay.
• sw-faulty (2): The switch has experienced an unknown fault.
• sw-embedded-port-fault (3): The switch has experienced an embedded port fault.
swNumSensors
OID 1.3.6.1.4.1.1588.2.1.1.1.1.21
Description The number of sensors inside the switch.
Note For example, the SAN Switch 2/16 value is between 1 and 13 (temperature = 6, fan =
3, power supply = 4). The value might vary depending on the switch model. For Fabric
OS 4.x, if no sensor is available, this variable is assigned the value –1.
swSensorTable
OID 1.3.6.1.4.1.1588.2.1.1.1.1.22
Description Table of sensor entries.