HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

142 SW MIB objects
sw traps
This section contains descriptions and other information that is specific to sw Traps.
See Table 12 for the descriptions of six traps defined in the SW.MIB, when each trap occurs, and how to
configure the trap, if it is possible to do so.
See the HP StorageWorks Fabric OS 5.x command reference guide and the snmpMibCapSet command
on how to enable or disable the sending of traps from the various MIBs.
The swSsn variable is optional in trap messages. The swGroupName, swGroupType, and
swGroupMemPos variables are optional in trap messages in 2.6.x. Each of these optional variables can be
set on or off using the snmpMibCapSet command.
SwFwEvent Integer Possible events available:
1started
2changed
3exceeded
4below
5above
6inBetween
SwFwBehavior Integer Behavior type for thresholds:
1triggered
2continuous
SwFwState Integer State type for last events:
1swFwInformative
2swFwNormal
3swFwfaulty
SwFwLicense Integer License state:
1swFwLicensed
2swFwNotLicensed
Table 11 SW-MIB text conventions (continued)
Type definition Value Description
Table 12 SW MIB traps
Name Specific When How to configure
swFault
(not supported)
1 During boot, if diagnostics fail N.A.
swSensorScn 2Obsolete N.A.
swFCPortScn 3 Port changes state Always on
swEventTrap 4 Switch event See the HP StorageWorks Fabric OS
5.x command reference guide and
the snmpConfig command help
page for more information.
swFabricWatchTrap 5 Threshold reached Fabric OS Command:
fwConfigure
swTrackChangesTrap 6 Login/logout Fabric OS Command:
swTrackChanges