HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 129
Entity MIB conformance information
This section lists the entityConformance MIBs. Figure 34 on page 113 shows the structure of the
entityConformance group.
entityCompliance
OID 1.3.6.1.2.1.47.3.1.1
Status Deprecated
Description The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
Module This module
MANDATORY-GROUPS {
entityPhysicalGroup,
entityLogicalGroup,
entityMappingGroup,
entityGeneralGroup,
entityNotificationsGroup
entity2Compliance
OID 1.3.6.1.2.1.47.3.1.2
Status Current
Description The compliance statement for SNMP entities that implement version 2 of the Entity MIB.
Module This module
MANDATORY-GROUPS {
entityPhysicalGroup,
entityPhysical2Group,
entityGeneralGroup,
entityNotificationsGroup
Group entityLogical2Group
Description Implementation of this group is not mandatory for agents that model all MIB object
instances within a single naming scope.
Group entityMappingGroup
Description Implementation of the entPhysicalContainsTable is mandatory for all agents.
Implementation of the entLPMappingTable and entAliasMappingTables are not
mandatory for agents that model all MIB object instances within a single naming scope.
Note that the entAliasMappingTable might be useful for all agents; however,
implementation of the entityLogicalGroup or entityLogical2Group is required to support
this table.
Object entPhysicalSerialNum
Access Not-accessible
Description Read and write access is not required for agents that cannot identify serial number
information for physical entities or cannot provide nonvolatile storage for NMS-assigned
serial numbers.
Write access is not required for agents that can identify serial number information for
physical entities but cannot provide nonvolatile storage for NMS-assigned serial numbers.
Write access is not required for physical entities for which the associated value of the
entPhysicalIsFRU object is equal to false(2).