HP StorageWorks Fabric OS 5.x Fabric Watch Administrator Guide (AA-RVJ0B-TE, September 2005)

58 Default threshold values
NOTE: For the 4/32 SAN Switch, there is no fan default threshold because the fans are not monitored
by Fabric Watch. You can use fanShow to view the 4/32 SAN Switch fan status (OK or NOT OK).
However, you cannot use fwConfigure to manipulate the threshold or alarm actions against any fans.
Table 17 Environment class threshold defaults
Area Description Default threshold
settings
Default alarm
settings
Threshold
state
Fan Monitors switch
fan speed in RPMs
Unit: RPM
Time Base: none
HP StorageWorks
SAN Switch 2/8V,
2/16V, 2/16N
Low: 4500
High: 11000
Buffer: 3
HP StorageWorks
SAN Switch 2/32
Low: 2600
High: 10000
Buffer: 3
HP StorageWorks
SAN Switch 4/32
Low: 3000
High: 12000
Buffer: 3
HP StorageWorks
Core Switch 2/64
Low: 2000
High: 3400
Buffer: 3
HP StorageWorks
SAN Director 2/128
Low: 1600
High: 3400
Buffer: 3
Changed: 0
Above: 3
Below: 3
In-Between: 1
Informative
Out_of_range
Out_of_range
In_range