HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

98 Error messages
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended Action
Reboot or power cycle the switch.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1011
Message
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1012
Message
Probable Cause
Indicates that an authentication is rejected because the remote entity does not support authentication.
Recommended Action
Make sure the entity at the other end of the link supports authentication.
Severity
WARNING
<timestamp>, [AUTH-1011], <sequence-number>,, ERROR, <system-name>,
Failed to register for failover operation: switch <switch number>
error <error code>
<timestamp>, [AUTH-1012], <sequence-number>,, WARNING,
<system-name>, Authentication <code> is rejected: port <port
number> explain <explain code> reason <reason code>