HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

96 Error messages
Severity
INFO
AUTH-1004
Message
Probable Cause
Indicates that the authUtil command has failed to set the authentication configuration value. The data
type can be either authentication type or DH group type.
Recommended Action
Retry the authUtil command.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and
contact your switch service provider.
Severity
ERROR
AUTH-1005
Message
Probable Cause
Indicates an authentication file corruption.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and
contact your switch service provider.
Severity
ERROR
AUTH-1006
Message
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
<timestamp>, [AUTH-1004], <sequence-number>,, ERROR, <system-name>,
Failed to set <data type> type to <setting value>.
<timestamp>, [AUTH-1005], <sequence-number>,, ERROR, <system-name>,
Authentication file does not exist: <error code>.
<timestamp>, [AUTH-1006], <sequence-number>,, ERROR, <system-name>,
Failed to open authentication configuration file.