HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 95
2Error messages
AUTH error messages
AUTH-1001
Message
Probable Cause
Indicates that the secret database operation has been updated using the secAuthSecret command. The
values for Operation type can be "set" or "remove".
Recommended Action
No action is required.
Severity
INFO
Message
Probable Cause
Indicates that the specified action has failed to update the secret database using the secAuthSecret
command. The values for Operation type can be "set" or "remove".
Recommended Action
Retry the secAuthSecret command.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and
contact your switch service provider.
Severity
ERROR
AUTH-1003
Message
Probable Cause
Indicates an authentication configuration value was set to a specified value. The data type is either
authentication type or DH group type.
Recommended Action
No action is required.
<timestamp>, [AUTH-1001], <sequence-number>,, INFO, <system-name>,
<Operation type> has been successfully done.
<timestamp>, [AUTH-1002], <sequence-number>,, ERROR, <system-name>,
<Operation type> has failed.
<timestamp>, [AUTH-1003], <sequence-number>,, INFO, <system-name>,
<data type> type has been successfully set to <setting value>.