HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 407
ZONE-1023
Message
Probable Cause
Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the other side
of the port is busy.
Recommended Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
INFO
ZONE-1024
Message
Probable Cause
Indicates that the cfgSave command ran successfully. The <Information message> is “cfgSave completes
successfully."
Recommended Action
No action is required.
Severity
INFO
ZONE-1026
Message
Probable Cause
Indicates that the total number of S_ID entries while creating or adding a zone group exceeds the limit.
Recommended Action
If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that port.
Severity
INFO
<timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>,
Switch connected to port (<port number>) is busy. Retry zone merge
<timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>,
<Information message>
<timestamp>, [ZONE-1026], <sequence-number>,, INFO, <system-name>,
port <port number> Out of CAM entries