HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 405
ZONE-1015
Message
Probable Cause
Indicates that a zoning change operation is not allowed because the zoning transaction is opened by
another task. Indicates concurrent modification of the zone database by multiple administers.
Recommended Action
Wait until the previous transaction is completed. Verify that only one administrator is working with the zone
database at a time.
Severity
WARNING
ZONE-1017
Message
Probable Cause
Indicates that the Fabric Assist (FA) zoning configuration has more than one initiator. The probable cause is
incorrect entries in the FA zoning configuration.
Recommended Action
Edit the zone database to ensure that only one initiator is set for each FA zone configuration.
Severity
ERROR
ZONE-1018
Message
Probable Cause
Indicates that an incorrect zoning enforcement type was reported on the specified port. This is a software
error. A QuickLoop zone type (value = 4) or an uninitialized type (value = 0) are invalid. The valid zone
type values are:
• hard port zone (value = 1)
• hard wwn zone (value = 2)
• session based hard zoning (value = 3)
• FA zone (value = 5)
<timestamp>, [ZONE-1015], <sequence-number>,, WARNING,
<system-name>, Not owner of the current transaction <transaction
ID>
<timestamp>, [ZONE-1017], <sequence-number>,, ERROR, <system-name>,
FA Zone(<zone name>) contains incorrect number of Initiator and
Target devices
<timestamp>, [ZONE-1018], <sequence-number>,, ERROR, <system-name>,
Incorrect zoning enforcement type(<zone type>) at port(<port
number>)