HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

400 Error messages
WEBD-1006
Message
Probable Cause
Indicates that the size of HTTP logfile exceeded the maximum limit.
Recommended Action
No action is required.
Severity
INFO
WEBD-1007
Message
Probable Cause
Indicates that the IP address of the switch changed and the HTTP server is restarted.
Recommended Action
No action is required.
Severity
INFO
ZOLB Error Messages
ZOLB-1001
Message
Probable Cause
Indicates that there was an internal timeout on the IPC between the name server (NS) and the zoning
modules. This usually indicates that the system was busy.
Recommended Action
This message generates core dump files of the related modules (zoned, nsd, rcsd). Copy these core files
using the saveCore command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
<timestamp>, [WEBD-1006], <sequence-number>,, INFO, <system-name>,
HTTP server restarted due to logfile truncation
<timestamp>, [WEBD-1007], <sequence-number>,, INFO, <system-name>,
HTTP server will be restarted due to change of IP Address
<timestamp>, [ZOLB-1001], <sequence-number>,, ERROR, <system-name>,
ZONELIB <error message>