HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 399
Severity
WARNING
WEBD-1003
Message
Probable Cause
Indicates that the HTTP/HTTPS interface is disabled. This is logged when HTTP/HTTPS is disabled through
the configure command.
Recommended Action
Run the configure command to enable HTTP/HTTPS. For more information on the configure command,
refer to the
HP StorageWorks Fabric OS 5.x command reference guide .
Severity
INFO
WEBD-1004
Message
Probable Cause
Indicates that the HTTP server configuration has changed.
Recommended Action
No action is required.
Severity
INFO
WEBD-1005
Message
Probable Cause
Indicates that the size of HTTP logfile exceeded the maximum limit.
Recommended Action
No action is required.
Severity
WARNING
<timestamp>, [WEBD-1003], <sequence-number>,, INFO, <system-name>,
HTTP/HTTPS interface disabled
<timestamp>, [WEBD-1004], <sequence-number>,, INFO, <system-name>,
HTTP server will be restarted due to configuration change
<timestamp>, [WEBD-1005], <sequence-number>,, WARNING,
<system-name>, HTTP server will be restarted for logfile truncation