HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

398 Error messages
USWD Error Messages
USWD-1006
Message
Probable Cause
Indicates a warning state in the system. This is an internal use only message.
Recommended Action
No action is required.
Severity
WARNING
WEBD Error Messages
WEBD-1001
Message
Probable Cause
Indicates that the SSL certificate file is either invalid or absent.
Recommended Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For more
information on the configure command, refer to the
HP StorageWorks Fabric OS 5.x command reference
guide
.
Severity
WARNING
WEBD-1002
Message
Probable Cause
Indicates that the SSL key file is either invalid or absent.
Recommended Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For more
information on the configure command, refer to the
HP StorageWorks Fabric OS 5.x command reference
guide
.
<timestamp>, [USWD-1006], <sequence-number>,, WARNING,
<system-name>, uSWD: <Warning message>
<timestamp>, [WEBD-1001], <sequence-number>,, WARNING,
<system-name>, Missing or Invalid Certificate file -- HTTPS is
configured to be enabled but could not be started.
<timestamp>, [WEBD-1002], <sequence-number>,, WARNING,
<system-name>, Missing or Invalid Key file -- HTTPS is configured to
be enabled but could not be started.