HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 397
Probable Cause
Indicates that the switch detected an inconsistency in the routing database between the routing protocol
and the hardware configuration. The first port number displayed is what the hardware has configured and
the second port number displayed is what the protocol is using.
Recommended Action
Run the switchDisable command and then the switchEnable command to reset the routing database.
Run the uRouteShow command to display the new routing tables.
Severity
CRITICAL
UCST-1020
Message
Probable Cause
Indicates that the configured static route cannot be applied to the routing database due to a bloom ASIC
hardware limitation.
Recommended Action
No action is required.
Severity
WA R NIN G
UPTH Error Messages
UPTH-1001
Message
Probable Cause
Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the
candidate list (domain ID list).
Recommended Action
No action is required. This will end the current SPF computation.
Severity
WARNING
<timestamp>, [UCST-1020], <sequence-number>,, WARNING,
<system-name>, Static route (input-area: <port number>, domain:
<domain ID> output-area: <port number>) has been ignored due to
platform limitation.
<timestamp>, [UPTH-1001], <sequence-number>,, WARNING,
<system-name>, No minimum cost path in candidate list