HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

396 Error messages
TS-1006
Message
Probable Cause
Indicates that a time service event is occurring or has failed. The message might be one of the following:
• Init failed. Time Service exiting
Probable Cause: Initialization error, Time Server exits.
• Synchronizing time of day clock
Probable Cause: Usually logged during temporary operational issues when the clock goes out of
synchronization: For example, when a time update packet is missed due to fabric reconfiguration or
role change of the principal or primary FCS switch. If the message does not recur, it should be ignored.
• Validating time update
Probable Cause: Usually logged during temporary operational issues when a time update packet
cannot be validated in a secure fabric. For example, during fabric reconfiguration or role change of the
primary FCS switch. If the message does not recur, it should be ignored.
Recommended Action
No action is required.
Severity
INFO
UCST Error Messages
UCST-1003
Message
Probable Cause
Indicates that duplicate paths were reported to the specified domain from the specified output port. The
path database (PDB) pointer is the address of the path database and provides debugging information.
Recommended Action
No action is required.
Severity
INFO
UCST-1007
Message
<timestamp>, [TS-1006], <sequence-number>,, INFO, <system-name>,
<message>
<timestamp>, [UCST-1003], <sequence-number>,, INFO, <system-name>,
Duplicate Path to Domain <domain ID>, Output Port = <port number>,
PDB pointer = 0x<value>
<timestamp>, [UCST-1007], <sequence-number>,, CRITICAL,
<system-name>, Inconsistent route detected: Port = <port number>,
should be <port number>