HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

394 Error messages
TRCK-1004
Message
Probable Cause
Indicates that the track change feature recorded a configuration change for the switch. The track change
feature records any change to the configuration file in nonvolatile memory, including a
configDownload. This message is not generated for a configUpload. All configuration changes
occur through the PDM server, so the PDMIPC is the only task possible.
Recommended Action
No action is required. Run the configShow command to view the configuration file.
Severity
INFO
TRCK-1005
Message
Probable Cause
Indicates that the track change feature has been enabled.
Recommended Action
No action is required. Run the trackChangesSet 0 command to disable the track change feature.
Severity
INFO
TRCK-1006
Message
Probable Cause
Indicates that the track change feature has been disabled.
Recommended Action
No action is required. Run the trackChangesSet 1 command to enable the track changes feature.
Severity
INFO
<timestamp>, [TRCK-1004], <sequence-number>,, INFO, <system-name>,
Config file change from task:<task>
<timestamp>, [TRCK-1005], <sequence-number>,, INFO, <system-name>,
Track-changes on
<timestamp>, [TRCK-1006], <sequence-number>,, INFO, <system-name>,
Track-changes off