HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 381
"Firmwaredownload failed due to Standby CP timeout." 0x50
"Unable to check firmware version due to Standby CP timeout." 0x51
"Firmwaredownload failed due to Standby CP timeout." 0x52
"Firmwaredownload failed due to Standby CP timeout." 0x53
"Standby CP failed to reboot and was not responding." 0x54
"Firmwarecommit failed due to Standby CP timeout." 0x55
"Unable to check firmware version due to Standby CP timeout." 0x56
"Unable to restore the original firmware due to Standby CP timeout." 0x57
"Standby CP failed to reboot and was not responding." 0x58
"Unable to check firmware version due to Standby CP timeout." 0x59
"Sanity check failed because firmwareDownload is already in progress." 0x60
"Sanity check failed because firmwareDownload is already in progress." 0x61
NOT USED 0x62
"System Error." 0x63
"Active CP forced failover succeeded. Now this CP becomes Active." 0x64
"Standby CP booted up." 0x65
"Standby CP failed to reboot." 0x66
"Standby rebooted successfully." 0x67
"Standby failed to reboot." 0x68
"Firmwarecommit has started to restore the secondary partition." 0x69
"Local CP is restoring its secondary partition." 0x6a
"Unable to restore the secondary partition. Please use
firmwaredownloadstatus and firmwareshow to see firmware status."
0x6b
"Firmwaredownload has started on Standby CP. It might take up to 10
minutes."
0x6c
"Firmwaredownload has completed successfully on Standby CP." 0x6d
"Standby CP reboots." 0x6e
"Standby CP failed to boot up." 0x6f
"Standby CP booted up with new firmware." 0x70
"Standby CP failed to boot up with new firmware." 0x71
"Firmwaredownload has completed successfully on Standby CP." 0x72
"Firmwaredownload has started on Standby CP. It might take up to 10
minutes. "
0x73
"Firmwaredownload has completed successfully on Standby CP." 0x74
"Standby CP reboots." 0x75
"Standby CP failed to reboot." 0x76
Table 5 Upgrade messages and code values (continued)
Upgrade messages Code