HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

378 Error messages
Probable Cause
Indicates the firmwareCommit or firmwareRestore command has started to update the secondary
partition.
Recommended Action
No action is required. Run the firmwareDownloadStatus command for more information.
Severity
INFO
SULB-1005
Message
Probable Cause
Indicates that the forced failover was successful and the standby CP is now the active CP.
Recommended Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.
Severity
INFO
SULB-1006
Message
Probable Cause
Indicates that the previous standby has now become the active CP and is running the new firmware
version.
Recommended Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.
Severity
INFO
SULB-1007
Message
<timestamp>, [SULB-1005], <sequence-number>,, INFO, <system-name>,
Current Active CP is preparing to failover.
<timestamp>, [SULB-1006], <sequence-number>,, INFO, <system-name>,
Forced failover succeeded. New Active CP is running new firmware.
<timestamp>, [SULB-1007], <sequence-number>,, INFO, <system-name>,
Standby CP reboots.