HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 377
Recommended Action
Check the FTP server and settings. Run the supportFtp command to set the FTP parameters. After the FTP
problem is corrected, rerun the supportSave command.
Severity
WARNING
LB Error Messages
SULB-1001
Message
Probable Cause
Indicates that the firmwareDownload command has started. This process can take some time; wait
until the process is complete before initiating any new commands to the system.
Recommended Action
Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload
command to continue without disruption. No action is required.
Run the firmwareDownloadStatus command for more information.
Severity
WARNING
SULB-1002
Message
Probable Cause
Indicates that the firmwareDownload command has completed successfully and loaded firmware to
both the CPs.
Recommended Action
No action is required. The firmwareDownload command has completed as expected.
Run the firmwareDownloadStatus command for more information.
Severity
INFO
SULB-1003
Message
<timestamp>, [SULB-1001], <sequence-number>,, WARNING,
<system-name>, Firmwaredownload command has started.
<timestamp>, [SULB-1002], <sequence-number>,, INFO, <system-name>,
Firmwaredownload command has completed successfully.
<timestamp>, [SULB-1003], <sequence-number>,, INFO, <system-name>,
Firmwarecommit has started.