HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

376 Error messages
Recommended Action
Retry changing the SNMP community strings from the primary switch.
Severity
ERROR
SNMP-1004
Message
Probable Cause
Indicates that the SNMP configuration is incorrect and the SNMP service will not work correctly.
Recommended Action
Change the SNMP configuration back to the default.
Severity
ERROR
SS Error Messages
SS-1000
Message
Probable Cause
Indicates that the supportSave command was used to transfer support information to a remote FTP
location.
Recommended Action
No action is required.
Severity
INFO
SS-1001
Message
Probable Cause
Indicates that an FTP error occurred during execution of the supportSave command.
<timestamp>, [SNMP-1004], <sequence-number>,, ERROR, <system-name>,
Incorrect SNMP configuration.
<timestamp>, [SS-1000], <sequence-number>,, INFO, <system-name>,
supportSave has ftp'ed support information to the host with IP
address <host ip>.
<timestamp>, [SS-1001], <sequence-number>,, WARNING, <system-name>,
supportSave's ftp operation to host IP address <host ip> aborted.