HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 375
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SNMP Error Messages
SNMP-1001
Message
Probable Cause
Indicates that the SNMP service could not be started because of the specified Reason. You will not be able
to query the switch through SNMP.
Recommended Action
Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified
Reason is an initialization failure, the switch requires a reboot.
Severity
ERROR
SNMP-1002
Message
Probable Cause
Indicates that the initialization of the SNMP service failed and you will not be able to query the switch
through SNMP.
Recommended Action
Reboot or power cycle the switch. This will automatically initialize SNMP.
Severity
ERROR
SNMP-1003
Message
Probable Cause
Indicates that the changes in the SNMP community strings could not be propagated to other switches in the
secure fabric.
<timestamp>, [SNMP-1001], <sequence-number>,, ERROR, <system-name>,
SNMP service is not available <Reason>.
<timestamp>, [SNMP-1002], <sequence-number>,, ERROR, <system-name>,
SNMP <Error Details> initialization failed.
<timestamp>, [SNMP-1003], <sequence-number>,, ERROR, <system-name>,
Distribution of Community Strings to Secure Fabric failed.