HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 369
Probable Cause
Indicates that the security mode of the fabric was either enabled or disabled.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-3002
Message
Probable Cause
Indicates that the specified security event has occurred. The event can be:
• There has been an FCS failover.
• A security policy has been activated.
• A security policy has been saved.
• A security policy has been aborted.
• A non-FCS password has changed.
• A temporary password was set or reset.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-3003
Message
Probable Cause
Indicates that a new security policy with entries has been created. When you use a wildcard (for example,
an asterisk) in creating a policy, the audit report displays the wildcard in the event info field.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
<timestamp>, [SEC-3002], <sequence-number>, AUDIT, INFO,
<system-name>, User: <User Name>, Role: <User Role>, Event: <Event
Name>, Status: <Event Status>, Info: NONE
<timestamp>, [SEC-3003], <sequence-number>, AUDIT, INFO,
<system-name>, User: <User Name>, Role: <User Role>, Event: <Event
Name>, Status: <Event Status>, Info: Create <Policy Name> policy,
with <Member List> entries.