HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 367
Recommended Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database might not be correctly updated for that specific
switch.
Severity
INFO
SEC-1305
Message
Probable Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurence.
Recommended Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database might not be correctly updated for that specific
switch.
Severity
INFO
SEC-1306
Message
Probable Cause
Indicates that the certificate could not be verified with root certificate authority (CA). This could happen if
an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a root CA
certificate does not exist on the switch.
Recommended Action
Run the pkiShow command and verify that all PKI objects exist on the switch. If a failure to validate PKI
objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS User's Guide. If
PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric.
Severity
INFO
SEC-1307
Message
<timestamp>, [SEC-1305], <sequence-number>,, INFO, <system-name>,
This switch has no zoning license.
<timestamp>, [SEC-1306], <sequence-number>,, INFO, <system-name>,
Failed to verify certificate with root CA.
<timestamp>, [SEC-1307], <sequence-number>,, INFO, <system-name>,
Got response from Radius server <Radius server identity>.