HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

364 Error messages
SEC-1202
Message
Probable Cause
Indicates that a MS security violation was reported. The unauthorized device specified in the message
attempted to establish a connection.
Recommended Action
Check the MS server policy and verify that the connection is allowed. If the connection is allowed but not
specified, enable the connnection in the MS policy. If the MS policy does not allow the connection, this is
a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.
Severity
INFO
SEC-1250
Message
Probable Cause
Indicates that an internal error caused the DCC policy enforcement to fail.
Recommended Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
SEC-1251
Message
Probable Cause
Indicates that the security database conversion failed because of invalid values. The reason is specified in
the text message variable and faulty value is printed in value variable.
Recommended Action
Retry the failed security command.
<timestamp>, [SEC-1202], <sequence-number>,, INFO, <system-name>,
Security violation: Unauthorized access from MS device node name
<device node name>, device port name <device port name>.
<timestamp>, [SEC-1250], <sequence-number>,, WARNING,
<system-name>, DCC enforcement API failed: <failed action>
err=<status>, key=<data>
<timestamp>, [SEC-1251], <sequence-number>,, ERROR, <system-name>,
Policy to binary conversion error: <text message> <value>.