HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 363
Probable Cause
Indicates that a serial connection policy security violation was reported. An attempt was made to access
the serial console on the specified switch instance when it is disabled.
Recommended Action
Check to see if an authorized access attempt is being made on the console. If so, add the switch WWN to
the serial policy. If the host is not allowed access to the fabric, this is a valid violation message and an
unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise
security policy.
Severity
INFO
SEC-1200
Message
Probable Cause
Indicates that an MS forward security violation was reported. A management server command was
forwarded from a non-primary FCS switch.
Recommended Action
Check the MS policy and verify that the connection is allowed. If the connection is allowed but not
specified, enable the connection in the MS policy. If the MS policy does not allow the connection, this is a
valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action,
as defined by your enterprise security policy.
Severity
INFO
SEC-1201
Message
Probable Cause
Indicates that an MS operation security violation was reported. An MS device operation occurred on a
non-primary FCS switch.
Recommended Action
Check the management server policy and verify that the connection is allowed. If the connection is allowed
but not specified, enable the connection is MS policy. If the MS policy does not allow the connection, this
is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.
Severity
INFO
<timestamp>, [SEC-1200], <sequence-number>,, INFO, <system-name>,
Security violation: MS command is forwarded from non-primary FCS
switch.
<timestamp>, [SEC-1201], <sequence-number>,, INFO, <system-name>,
Security violation: MS device <device wwn> operates on non-primary
FCS switch.