HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 361
Severity
INFO
SEC-1194
Message
Probable Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurence.
Recommended Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database might not be correctly updated for that specific
switch.
Severity
WARNING
SEC-1195
Message
Probable Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurence.
Recommended Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database might not be correctly updated for that specific
switch.
Severity
WARNING
SEC-1196
Message
Probable Cause
Indicates that the default switch accounts admin and user do not exist on the switch when enabling
security.
<timestamp>, [SEC-1194], <sequence-number>,, WARNING,
<system-name>, This switch does not have all the required PKI
objects correctly installed.
<timestamp>, [SEC-1195], <sequence-number>,, WARNING,
<system-name>, This switch has no <component> license.
<timestamp>, [SEC-1196], <sequence-number>,, WARNING,
<system-name>, Switch does not have all default account names.