HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

358 Error messages
SEC-1186
Message
Probable Cause
Indicates that the RADIUS configuration was enabled or disabled as the primary AAA mechanism.
Recommended Action
No action is required.
Severity
INFO
SEC-1187
Message
Probable Cause
Indicates that an SCC security violation was reported. The specified unauthorized switch attempts to join
the secure fabric.
Recommended Action
Check the switch connection control policy (SCC policy specifies the WWNs of switches allowed in the
fabric) to verify which switches are allowed in the fabric. If the switch should be allowed in the fabric but
not included in the SCC policy, add the switch to the policy. If the switch is not allowed access to the fabric,
this is a valid violation message and an unauthorized entity is trying to access your fabric. Take
appropriate action, as defined by your enterprise security policy.
Severity
INFO
SEC-1188
Message
Probable Cause
Indicates that a DCC security violation was reported. The specified device attempted to login using FLOGI
to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If the device
changes connected port, the device will not be allowed to login.
Recommended Action
Check DCC policy and verify that the specified device is allowed in the fabric and is included in the DCC
policy. If the specified device not included in the policy, add it to the policy. If the host is not allowed
<timestamp>, [SEC-1186], <sequence-number>,, INFO, <system-name>,
<action> Radius Configuration.
<timestamp>, [SEC-1187], <sequence-number>,, INFO, <system-name>,
Security violation: Unauthorized switch <switch wwn> tries to join
secure fabric.
<timestamp>, [SEC-1188], <sequence-number>,, INFO, <system-name>,
Security violation: Unauthorized device <device node name> tries to
flogin to area <port number> of switch <switch wwn>.