HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

350 Error messages
Severity
INFO
SEC-1157
Message
Probable Cause
Indicates that the provisioning resources for a security policy failed due to low memory or internal error.
The status values can be either defined, active, or both. A negative value means that a policy set was
failed by the daemon.
Recommended Action
Retry the failed command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
INFO
SEC-1158
Message
Probable Cause
Indicates that the specified name is invalid. The name can be a policy name or a switch name.
Recommended Action
Enter a valid name.
Severity
INFO
SEC-1159
Message
Probable Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurence.
<timestamp>, [SEC-1157], <sequence-number>,, INFO, <system-name>,
PID Change failed: <Reason> <defined status> <active status>.
<timestamp>, [SEC-1158], <sequence-number>,, INFO, <system-name>,
Invalid name <Policy or Switch name>.
<timestamp>, [SEC-1159], <sequence-number>,, INFO, <system-name>,
Non_Reachable domain <Domain ID>.