HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 345
SEC-1126
Message
Probable Cause
Indicates that a secure mode disable operation completed successfully.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-1130
Message
Probable Cause
Indicates that an FCS failover operation was completed successfully.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-1135
Message
Probable Cause
Indicates that the version stamp of the secure fabric is reset.
Recommended Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
<timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>,
Secure mode has been disabled.
<timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>,
The Primary FCS has failed over to a new switch.
<timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>,
Secure fabric version stamp has been reset.