HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 343
Severity
INFO
SEC-1118
Message
Probable Cause
Indicates that the SNMP string could not be set.
Recommended Action
Usually this problem is transient. Retry the command.
Severity
INFO
SEC-1119
Message
Probable Cause
Indicates that the secure Fabric OS was enabled by the secModeEnable command.
Recommended Action
Verify that the security event was planned. If the security event was planned, there is no action required. If
the security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity
INFO
SEC-1121
Message
Probable Cause
Indicates that the time on the switch is not synchronized with the primary FCS, the data packet is corrupted,
or a replay attack is launched on the switch.
Recommended Action
Verify that the security event was planned. If the security event was planned, verify that all switches in the
fabric are in time synchronization with the primary FCS and that no external entity is trying to access the
fabric. When verification is complete, retry the operation.
Severity
ERROR
<timestamp>, [SEC-1118], <sequence-number>,, INFO, <system-name>,
Fail to set SNMP string.
<timestamp>, [SEC-1119], <sequence-number>,, INFO, <system-name>,
Secure mode has been enabled.
<timestamp>, [SEC-1121], <sequence-number>,, ERROR, <system-name>,
Time is out of range when <text>.