HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

310 Error messages

Severity

ERROR

RTWR-1002

Message

Probable Cause

Indicates that the RTWR has exhausted the maximum number of retries sending data to the specified

domain. Details are as follows:

• RTWRTransmit: Max retries exhausted

• detail1: Port

• detail2: Domain

• detail3: Retry Count

• detail4: Status

• detail5: Process ID

Recommended Action

Run the fabricShow command to see if the specified domain ID is online.

Enable the switch with the specified domain ID.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity

WARNING

RTWR-1003

Message

Probable Cause

Indicates how many times RTWR failed to get a response and retried.

Recommended Action

Run the dom command to verify that the specified domain ID is reachable.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity

INFO

<timestamp>, [RTWR-1002], <sequence-number>,, WARNING,

<system-name>, RTWR <error message> 0x<detail1>, 0x<detail2>,

0x<detail3>, 0x<detail4>, 0x<detail5>

<timestamp>, [RTWR-1003], <sequence-number>,, INFO, <system-name>,

<module name>: RTWR retry <number of times retried> to domain