HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

308 Error messages
Recommended Action
To enable RPCD in secure mode, install a valid SSL certificate on the switch.
Severity
WARNING
RPCD-1003
Message
Probable Cause
Indicates that the SSL certificate file configured on the switch could not be accessed because root did not
have read access.
Recommended Action
Change the file system access level for the certificate file to have root read-level access.
Severity
WARNING
RPCD-1004
Message
Probable Cause
Indicates that the SSL certificate file has been corrupted.
Recommended Action
To enable RPCD in secure mode, install a valid SSL certificate on the switch.
Severity
WARNING
RPCD-1005
Message
Probable Cause
Indicates that the private key file is missing.
Recommended Action
Run the pkiCreate command to install a valid private key file.
<timestamp>, [RPCD-1003], <sequence-number>,, WARNING,
<system-name>, Permission denied accessing certificate file. Secure
RPCd is disabled.
<timestamp>, [RPCD-1004], <sequence-number>,, WARNING,
<system-name>, Invalid certificate file. Secure RPCd is disabled.
<timestamp>, [RPCD-1005], <sequence-number>,, WARNING,
<system-name>, Missing private key file. Secure RPCd is disabled.