HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

306 Error messages
RCS-1005
Message
Probable Cause
Indicates that a receiving switch is rejecting an RCS phase.
Recommended Action
If the reject is in ACA phase, wait several minutes and then retry the operation from the sender switch.
If the reject is in the SFC phase, check if the application license exists for the local domain and if the
application data is compatible.
Severity
INFO
RCS-1006
Message
Probable Cause
Indicates that a remote domain rejected an RCS phase initiated by an application on the local switch.
• If the reject phase is ACA, the remote domain might be busy and could not process the new request.
• If the reject phase is SFC, the data sent by the application might not be compatible or the domain does
not have the license to support that application.
Recommended Action
If the reject is in ACA phase, wait several minutes and then retry the operation.
If the reject is in the SFC phase, check if the application license exists for the remote domain and if the
application data is compatible.
Severity
INFO
RCS-1007
Message
<timestamp>, [RCS-1005], <sequence-number>,, INFO, <system-name>,
State <RCS phase>, Application <Application ID> returned 0x<Reject
code>.
<timestamp>, [RCS-1006], <sequence-number>,, INFO, <system-name>,
State <RCS phase>, Application <Application ID>, RCS CM. Domain
<Domain ID that sent the reject> returned 0x<Reject code>.
<timestamp>, [RCS-1007], <sequence-number>,, ERROR, <system-name>,
Cannot propagate new Zone DB as it exceeds domain <domain number>'s
maximum supported Zone DB size. Retry after reducing Zone DB size to
<max zone db size>.