HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 303
Recommended Action
To resume counting, delete some end-to-end monitors sharing the same hardware resource pool.
Severity
WARNING
PSWP Error Messages
PSWP-1001
Message
Probable Cause
Indicates that the portSwap command has been issued by the user.
Recommended Action
No action is required.
Severity
INFO
PSWP-1002
Message
Probable Cause
Indicates that the portSwap feature has been enabled in the switch by the user.
Recommended Action
No action is required.
Severity
INFO
PSWP-1003
Message
Probable Cause
Indicates that the portSwap feature has been disabled in the switch by the user.
<timestamp>, [PSWP-1001], <sequence-number>,, INFO, <system-name>,
Areas for port <wwn name corresponding to source port> and port <wwn
name corresponding to destination port> are swapped. New area for
port <wwn name corresponding to source port> is <wwn name
corresponding to destination port> and port <new area corresponding
to source wwn> is <new area corresponding to destination wwn>
<timestamp>, [PSWP-1002], <sequence-number>,, INFO, <system-name>,
Port Swap feature enabled
<timestamp>, [PSWP-1003], <sequence-number>,, INFO, <system-name>,
Port Swap feature disabled