HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

302 Error messages
Recommended Action
Tracing will not be available for Advanced Performance Monitoring, but other functions should function
normally. To retry activating tracing, reboot (or fail over) the CP.
Severity
ERROR
PS-1003
Message
Probable Cause
Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on at least
one ISL port.
Recommended Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is enabled.
ISL monitoring can only be disabled through the Fabric Access API.
Severity
WARNING
PS-1004
Message
Probable Cause
Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one ISL port.
Recommended Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is enabled.
ISL monitoring can only be disabled through the Fabric Access API.
Severity
WARNING
PS-1005
Message
Probable Cause
Indicates that ISL and end-to-end monitors have used up all the hardware resources.
<timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>,
Failed to set end-to-end monitoring mask on ISL ports.
<timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>,
Failed to add end-to-end monitors on ISL ports.
<timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>,
ISL monitor on port <port> stopped counting because no hardware
resources are available