HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 297
Probable Cause
Indicates that a system call failed.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1017
Message
Probable Cause
Indicates that a system call failed.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
CRITICAL
PDM-1019
Message
Probable Cause
Indicates that one line of the pdm.conf file is too long.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
<timestamp>, [PDM-1017], <sequence-number>,, CRITICAL,
<system-name>, System (<Error Code>): <Command>
<timestamp>, [PDM-1019], <sequence-number>,, WARNING,
<system-name>, File path or trigger too long