HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 295
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1009
Message
Probable Cause
Indicates that the PDM system call to setcfg failed.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1010
Message
Probable Cause
Indicates that the PDM process could not open the specified file name.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1011
Message
Probable Cause
Indicates that the PDM process could not read data from the specified file name.
<timestamp>, [PDM-1009], <sequence-number>,, WARNING,
<system-name>, Can't update Port Config Data
<timestamp>, [PDM-1010], <sequence-number>,, WARNING,
<system-name>, File open failed: <file name>
<timestamp>, [PDM-1011], <sequence-number>,, WARNING,
<system-name>, File read failed: <file name>