HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 291
Severity
WARNING
NS-1002
Message
Probable Cause
Indicates that the local switch cannot interact with the remote switch due to incompatible or obsolete
firmware.
Recommended Action
Run the firmwareDownload command to upgrade the remote switch to the latest level of firmware.
Severity
WARNING
NS-1003
Message
Probable Cause
Indicates that the name server on the standby CP has lower supported capability than the active CP due to
different firmware versions running on the active and standby CPs. This means that the active and standby
CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be
disruptive.
Recommended Action
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so
that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity
INFO
NS-1004
Message
<timestamp>, [NS-1002], <sequence-number>,, WARNING, <system-name>,
Remote switch 0x<Domain Id> has firmware revision lower than 2.2:
<Firmware Revision 1st character><Firmware Revision 2nd
character><Firmware Revision 3rd character><Firmware Revision 4th
character> which is not supported!
<timestamp>, [NS-1003], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't send update.
<timestamp>, [NS-1004], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't sync.