HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 289
Recommended Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
NBFS Error Messages
NBFS-1001
Message
Probable Cause
Indicates that a duplicate E_Port State Change Number was reported. The neighbor finite state machine
(NBFSM) states are as follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
Recommended Action
No action is required.
Severity
INFO
NBFS-1002
Message
Probable Cause
Indicates that the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
<timestamp>, [NBFS-1001], <sequence-number>,, INFO, <system-name>,
Duplicate E_Port SCN from port <portnumber> in state <state change
name> (<state change number>)
<timestamp>, [NBFS-1002], <sequence-number>,, ERROR, <system-name>,
Wrong input: <state name> to neighbor FSM, state <current state
name>, port <portnumber>