HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

282 Error messages
Probable Cause
Indicates that there is no local link state record entry in the link state database. The switch should always
generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of the LSR (link state
record). The switch generates its local link state record when first enabled. By disabling and enabling the
switch, a new local link state record is generated.
Recommended Action
Run the switchDisable and switchEnable commands. A new local link state record is generated
during the switch enable.
Severity
CRITICAL
LSDB-1004
Message
Probable Cause
Indicates that there is no link state record for the specified local domain.
Recommended Action
No action is required. The other switch will pass the LSD when the fabric has become stable.
Severity
WARNING
MFIC Error Messages
MFIC-1001
Message
Probable Cause
Indicates that the system is temporarily out of resources.
Recommended Action
This message is often transitory, and requires no action.
If the message persists, run a switch reboot or an haFailover (if applicable).
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
<timestamp>, [LSDB-1004], <sequence-number>,, WARNING,
<system-name>, No Link State Record for domain <local domain>
<timestamp>, [MFIC-1001], <sequence-number>,, ERROR, <system-name>,
failure at sysmod_scn registry rc= <failure reason>