HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

278 Error messages
Probable Cause
Indicates that the PID format was changed by the administrator.
Recommended Action
No action is required. For more information on PID, format refer to the HP StorageWorks Fabric OS 5.x
administrator’s guide
.
Severity
INFO
KSWD error messages
KSWD-1003
Message
Probable Cause
Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to convey
information that might be of interest to the customer regarding the state of the system. Refer to the string at
the end of the error message for specific information. The switch will reboot (on single-CP switches) or
failover (on dual-CP switches).
The error message might be any one of the following:
U R HERE
• <Detected unexpected termination of: <daemon name>>
Probable Cause: One of the critical daemons ended unexpectedly.
• <<daemon name> failed to refresh SWD*** Sending SIGABRT to pid <process id number>>
Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal abort.
Recommended Action
Run the savecore command to find if any core files were created. If a core file is found, FTP all core files to
a secure server location.
Copy the error message, any core file information, and contact your switch service provider.
Severity
WARNING
KTRC error messages
KTRC-1001
Message
Probable Cause
Indicates that the dump memory size has exceeded the dump file size.
<timestamp>, [KSWD-1003], <sequence-number>,, WARNING,
<system-name>, kSWD: <Warning message>
<timestamp>, [KTRC-1001], <sequence-number>,, WARNING,
<system-name>, Dump memory size exceeds dump file size