HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 255
Severity
WARNING
FW-1439
Message
Probable Cause
Indicates that the switch status is not in a healthy state. This occurred because the switch is offline.
Recommended Action
Run the switchEnable command.
Severity
WARNING
FW-1440
Message
Probable Cause
Indicates that the specified FRU’s state has changed to "absent".
Recommended Action
No action is required. Verify that the event was planned.
Severity
INFO
FW-1441
Message
Probable Cause
Indicates that specified FRU’s state has changed to "inserted". This means that a FRU is inserted but
not powered on.
Recommended Action
No action is required. Verify that the event was planned.
Severity
INFO
<timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Switch offline.
<timestamp>, [FW-1440], <sequence-number>,, INFO, <system-name>,
<FRU label> state has changed to <FRU state>.
<timestamp>, [FW-1441], <sequence-number>,, INFO, <system-name>,
<FRU label> state has changed to <FRU state>.