HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

250 Error messages
Severity
WARNING
FW-1425
Message
Probable Cause
Indicates that the switch status has changed to a healthy state. This occurred because a policy is no longer
violated. The valid <bad state> values are MARGINAL or DOWN.
Recommended Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity
INFO
FW-1426
Message
Probable Cause
Indicates that the switch status is not in a healthy state. This occurred because the number of faulty or
missing power supplies is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended Action
Replace the faulty or missing power supply.
Severity
WARNING
FW-1427
Message
Probable Cause
Indicates that the switch status is not in a healthy state. This occurred because the number of faulty power
supplies is greater than or equal to the policy set by the switchStatusPolicySet command.
Recommended Action
Replace the faulty power supply.
<timestamp>, [FW-1425], <sequence-number>,, INFO, <system-name>,
Switch status changed from <Bad state> to HEALTHY.
<timestamp>, [FW-1426], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Power supply: <Number Bad>
bad, <Number Missing> absent.
<timestamp>, [FW-1427], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Power supply: <Number Bad>
bad.