HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

244 Error messages
sends its certificate to a switch, the receiving switch saves the WWN of that primary FCS switch. If a secure
switch finds that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it
increments this counter and resets the WWN of the primary FCS to all zeroes.
Recommended Action
No action is required.
Severity
INFO
FW-1370
Message
Probable Cause
Indicates that the number of no-FCS violations has risen above the high boundary. This counter records
how often the switch loses contact with the primary FCS switch. When the primary FCS switch in the fabric
sends its certificate to a switch, the receiving switch saves the WWN of that primary FCS switch. If a secure
switch finds that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it
increments this counter and resets the WWN of the primary FCS to all zeroes.
Recommended Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
WARNING
FW-1371
Message
Probable Cause
Indicates that the number of no-FCS violations has changed from a value outside of the acceptable range
to a value within the acceptable range. This counter records how often the switch loses contact with the
primary FCS switch. When the primary FCS switch in the fabric sends its certificate to a switch, the
receiving switch saves the WWN of that primary FCS switch. If a secure switch finds that there are no FCSs
in the fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets
the WWN of the primary FCS to all zeroes.
Recommended Action
No action is required.
Severity
INFO
<timestamp>, [FW-1370], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1371], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.