HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 243
Severity
WARNING
FW-1367
Message
Probable Cause
Indicates that the number of time service (TS) out-of-sync violations has changed from a value outside of the
acceptable range to a value within the acceptable range.
Recommended Action
No action is required.
Severity
INFO
FW-1368
Message
Probable Cause
Indicates that the number of no-FCS violations has changed. This counter records how often the switch
loses contact with the primary FCS switch. When the primary FCS switch in the fabric sends its certificate to
a switch, the receiving switch saves the WWN of that primary FCS switch. If a secure switch finds that there
are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it increments this counter
and resets the WWN of the primary FCS to all zeroes.
Recommended Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
INFO
FW-1369
Message
Probable Cause
Indicates that the number of no-FCS violations has fallen below the low boundary. This counter records
how often the switch loses contact with the primary FCS switch. When the primary FCS switch in the fabric
<timestamp>, [FW-1367], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1368], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1369], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.