HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 239
Severity
INFO
FW-1356
Message
Probable Cause
Indicates that the number of authentication failures has changed. Authentication failures can occur for
many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not
be signed properly, or send unexpected packets. The port where authentication fails is segmented. This
counter keeps track of the number of authentication failures.
Recommended Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
INFO
FW-1357
Message
Probable Cause
Indicates that the number of authentication failures has fallen below the low boundary. Authentication
failures can occur for many reasons. The switch on the other side might not support the protocol, have an
invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails
is segmented. This counter keeps track of the number of authentication failures.
Recommended Action
No action is required.
Severity
INFO
FW-1358
Message
<timestamp>, [FW-1356], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1357], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1358], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.